UINICS LV1000 Series, Instruction Manual

Page: 52 / 67

- 48 -
Ａ Ｂ Ｃ Ｄ Ｅ
９ ９ ９ ９
１ ２ ３ ４
○ ● ○ ○
Hold %
○ ○
When pushed. It will become OUT2 setup.
Please use the preset value of hope by and .
OUT3 and OUT4 setup are also the same.
Ａ Ｂ Ｃ Ｄ Ｅ
Ｐ ｒ．Ｓ ｔ
１ ２ ３ ４
○ ● ○ ○
Hold %
○ ○
Set value is registered by a and it returns to a set
list display.
Ａ Ｂ Ｃ Ｄ Ｅ
Ｐ ｒ．Ｓ ｔ
１ ２ ３ ４
○ ● ○ ○
Hold %
○ ○
Returns to the set list display.
Set value is not registered.
Ａ Ｂ Ｃ Ｄ Ｅ
Measurement indicat
１ ２ ３ ４
○ ● ○ ○
Hold %
○ ○
It will become a measurement display if a pressed.
Refer to P.31 to 35 "Mode №4 to 9" 「Common setting」、and ｢Setup of OUT1 to OUT4｣ for a setupof
a preset output.
＜Caution＞
1. While registering a preset value (after pressing a until it returns to a setting list),
please do not use the power OFF.
2．A decimal point position is interlocked with the position set up by "Mode №0" when an
output display is "Rate mete."
In "Ratio", it becomes an absolute location of 0.0.
In "a functional stop", it becomes having no decimal point.
Mode
ENT
ENT
RST
ENT
ENT
ENT
！
Mode