UINICS LV1000 Series, Instruction Manual

Page: 10 / 67

- 6 -
130 or more
+
0.
5
-
0
4
5
+0.8
-0
92
（Unit：mm）
7
0
o
r
m
or
e
Fitting for fixing the body
Fitting for fixing the body
Driver
Packing
Mater
Plate
３. Mountin meter
How to mount indicator (meter)
１． Cut the panel to insert the indicator (meter)
from the front.
Panel cutout dimensions
Fig.1
２．
Please push the Fitting for fixing the body.
Into a right and left both sides of the meter.
Fig.2
３．
Slide in the rear side (terminal stand side) as for
the Fitting for fixing the body.
It turns a screw by the driver.
The meter is fixed (right and left both sides)
Fig.3
1．Please install it horizontally.
2．Fit the body on to a panel 1.0-4.0mm in thickness.
3．Please do not tighten the screw of the mounting bracket too much.
（The case might be damaged when tightening too much.）