Assembly and installation
36
5816,0013US / Version 02
7 Assembly
and
installation
7.1
Safety
See also safety notes on page 19, chapter 2.6 "Occupational
General
WARNING
Danger by inappropriate installation!
Inappropriate installation can cause severe injuries!
– Only specialist personnel or electrical
specialists must perform any assembly and
installation tasks.
– Prior to work, ensure that there is sufficient
assembly space.
– Pay attention to tidiness and cleanness at the
assembly site! Loosely stacked or lying around
components and tools are accident sources.
– Comply with specifications for foundations and
reinforcement.
– Ensure correct arrangement and fit on all
assemblies and components.
– Install the indicated fastening elements
correctly.
Personal protective equipment
The following must be worn during all assembly and installation
work:
Work clothes
Protective gloves
Safety shoes.
7.2
Required steps
The following steps are to be completed prior to assembly and
installation:
Laying the foundation with reinforcement for the barrier and
install empty conduits.
Installing induction loops.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
