Electrical connection
5816,0013US / Version 02
51
8.4.2
Connecting safety loop
The safety loop is connected to the plug-in module "Detector 1 (A-
B)", clamps A or clamps B.
See page 91, chapter 16.1 "Wiring diagrams".
The clamp function parameters can be set in the menu "Detector 1
(A-B)" with the parameters "Mode A" or "Mode B".
See separate
document "Description of control units MGC and MGC Pro for
MHTM
TM
MicroDrive barriers".
4
A
B
A
B
A1 A2 B1 B2
3
2
1
Mag00519a
Fig. 17: Connecting safety loop
1 Control
unit
2
Connection of induction loop A
3
Plug-in module "Detector 1 (A-B)"
4
Connection of induction loop B
A Induction
loop
A
B Induction
loop
B
NOTE!
If four induction loops must be supervised, you can
connect another plug-in module with the "Detector"
function into the control unit. This plug-in module
registers as "Detector 2 (C-D)". To prevent mutual
interference between the induction loops, we re-
commend using a plug-in module instead of an
external detector.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
