Safety
20
5816,0013US / Version 02
Hot surfaces
CAUTION
Danger of burns!
… indicates the presence of a hot surface. Non-
observance of the safety instructions can lead to
minor injuries.
This pictogram is fixed on the following component:
– Motor in the barrier housing.
– Heating (optional) in the barrier housing.
2.6.2
Hazard notes and occupational safety
For your own safety and for the protection of the barrier
modules, the following information must be observed and
complied with:
Electric voltage
DANGER
Mortal danger by electric voltage!
Touching live parts can be lethal.
Damage to the insulation or to individual
components can be lethal.
– Switch off the power supply immediately in case
of damage to the insulation and arrange repair.
– Only electrical specialists may carry out
work on the electrical system.
– Switch off power supply and secure against re-
activation before performing any work. Test for
absence of voltage!
– Never bypass or deactivate fuses.
– When replacing fuses observe the correct
amperage specification.
– Keep moisture and dust away from live parts.
Moisture or dust may cause a short circuit. If the
electrical connection is established during
precipitation, e.g. rain or snow, penetration of
moisture must be prevented by suitable
measures, such as a protective cover.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
