Malfunctions
82
5816,0013US / Version 02
12.5 Moving the barrier arm in case of power failure
Horizontally moving barrier arm
WARNING
Risk of injury by the horizontally moving barrier
arm!
The barrier arm moves horizontally. A closing or
opening barrier arm can cause severe injuries or
property damage!
– Observe the swivel range of the barrier arm.
– Ensure freedom of movement. Remove
obstacles from the swivel range.
Lever system – crushing and
shearing danger
WARNING
Crushing and shearing danger from the lever
system!
The lever system can severely injure a person!
– Switch off power supply and secure against re-
activation before performing any work.
– When working in the area of the lever system,
ensure that the barrier does not start up
unexpectedly, e.g. by a control command or due
to wind.
– Secure the barrier arm so that unexpected
movement of the barrier arm e.g. by wind or
human force is not possible.
In case of power failure, the barrier arm may be at one of its dead
points. This means that the barrier arm can no longer be easily
moved by hand. In this case, proceed as follows:
1.
Remove rear cover of the barrier housing.
2.
Remove rear door of the barrier housing.
3.
Use a screwdriver through the slit of the safety sheet to push
the coupling lever from the dead point against the motor shaft.
4.
Install the rear door.
5.
Install the rear cover.
6.
Lock the lock at the rear door.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
