Safety
5816,0013US / Version 02
19
2.5
Personal protective equipment
It is necessary to wear personal protective equipment when
dealing with the barrier so as to minimise health hazards.
Before carrying out any work, properly dress in the necessary
protective equipment such as work clothes, protective gloves,
safety shoes, helmet and wear during work.
2.6
Occupational safety and special dangers
The remaining risks resulting from the risk analysis are specified in
the following section.
Observe the safety notes listed here and the warning notes
mentioned in the other chapters of these instructions to reduce
health hazards and to avoid dangerous situations.
2.6.1
Danger symbols on the MHTM
TM
MicroDrive barrier
The relevant dangerous areas on the barriers can be identified by
the following pictograms:
Electric voltage
DANGER
Mortal danger by electric voltage!
... indicates life threatening situations caused by
electric voltage. Non-observance of the safety
instructions causes severe injuries or death.
Necessary work may only be carried out by an
electrical specialist.
This pictogram is fixed on the following component:
– Assembly plate in the barrier housing.
WARNING
Danger of crushing!
… indicates the presence of components and items
moving towards each other. Non-observance of the
safety instructions can lead to severe injuries.
This pictogram is fixed on the following component:
– At the access points for the lever system on the
front and rear of the top assembly plate.
– At the access point for the flanged shaft on the
front and rear of the top assembly plate.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
