Start-up and operation
64
5816,0013US / Version 02
10.3 Switching on and off the barrier
NOTICE
A too early mains voltage power up after a shut
down can result in damage of the equipment!
– Wait for at least 10 seconds after shutting off
the mains voltage before you switch the mains
voltage on again.
Mag00539
1
Fig. 25: Switching on and off the barrier
1
Double pole mains switch
Switching on
1.
Remove rear cover of the barrier housing.
2.
Remove rear door of the barrier housing.
3.
Switch on the barrier via the double pole mains switch.
4.
Depending on the settings in the "Start-up behaviour" menu,
the barrier arm slowly moves into the end position (homing
run) or stops.
5.
Install the rear door.
6.
Install the rear cover.
7.
Lock the lock at the rear door.
Switching off
1.
Remove rear cover of the barrier housing.
2.
Remove rear door of the barrier housing.
3.
Switch off the barrier via the double pole mains switch.
4.
Install the rear door.
5.
Install the rear cover.
6.
Lock the lock at the rear door.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
