Repair
84
5816,0013US / Version 02
13 Repair
13.1 Safety
See also safety notes on page 19, chapter 2.6 "Occupational
General
WARNING
Danger by inappropriate repair!
Inappropriate repair can cause severe or lethal
injuries.
– All repair work must only be performed by
authorised MHTM service specialists.
– Prior to work, ensure that there is sufficient
assembly space.
– Pay attention to tidiness and cleanness at the
assembly site! Loosely stacked or lying around
components and tools are accident sources.
– Only use original spare parts or spare parts
approved of by MAGNETIC. Procure spare
parts from your dealer or directly from the
manufacturer. For the address, see invoice,
delivery note or the reverse of these
instructions.
– After completion of repair work, ensure that all
covers are correctly mounted.
Lever system –crushing and
shearing danger
WARNING
Crushing and shearing danger from the lever
system!
The lever system can severely injure a person!
– Switch off power supply and secure against re-
activation before performing any work.
– When working in the area of the lever system,
ensure that the barrier does not start up
unexpectedly, e.g. by a control command or due
to wind.
– Secure the barrier arm so that unexpected
movement of the barrier arm e.g. by wind or
human force is not possible.
Personal protective equipment
The following must be worn during all repair work:
Work clothes
Protective gloves
Safety shoes.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
