Assembling flange and barrier arm
54
5816,0013US / Version 02
9 Assembling flange and barrier arm
9.1
Safety
See also safety notes on page 19, chapter 2.6 "Occupational
General
WARNING
Danger by inappropriate installation!
Inappropriate installation can cause severe injuries!
– Only specialist personnel or electrical
specialists must perform any assembly and
installation tasks.
– Prior to work, ensure that there is sufficient
assembly space.
– Pay attention to tidiness and cleanness at the
assembly site! Loosely stacked or lying around
components and tools are accident sources.
– Ensure correct arrangement and fit of all
assemblies and components.
– Install the indicated fastening elements
correctly.
Danger of crushing and shearing,
barrier arm
WARNING
Danger of crushing and shearing if the safety
distance between the barrier arm and other
objects is too low!
A closing or opening barrier arm can cause severe
injuries from crushing if the safety distance to other
objects is too low!
– Keep a safety distance of at least 2 ft (610 mm)
between the barrier arm and other objects, such
as walls, masonry or houses.
See page 26,
chapter 2.7.
– Assemble and install barrier system according
to Figure Fig. 8.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
