Assembling flange and barrier arm
60
5816,0013US / Version 02
Mount anchor support
4.
Mount the side parts at the flange. Install the anchoring axle.
Torque wrench: 16 AF
Tightening torque: 23.6 lbf ft (32 Nm)
Mag00581
Fig. 21: Mounting the side parts and the anchoring axle
5.
Mount anchor support on top. Proceed as follows for this:
Turn threaded terminal into the upper axle about half.
NOTICE! To avoid destruction of the anchor support, turn
the entire spiral rope.
Counter nuts.
1
2
Mag00515
Fig. 22: Mounting the upper anchor support
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
