Assembling flange and barrier arm
58
5816,0013US / Version 02
9.3
Mount the barrier arm and the anchor support
NOTE!
Depending on equipment of the barrier arm and its
weight, we recommend installing the barrier arm
with two people.
Prerequisites
The danger area is secured with barrier tape.
The flange is installed.
The swivel range of the barrier arm is known.
WARNING!
Danger of crushing between barrier arm and barrier housing!
1.
Switch off power supply. Ensure that the system is powered
down. Secure against reactivation.
Mount barrier arm
2.
Push the barrier arm onto the flange.
3.
Mount the barrier arm on the flange via the screws.
Torque wrench: 8 AF
Tightening torque: 8.8 lbf ft (12 Nm)
Mag00514a
1
2
Fig. 19: Mounting the barrier arm
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
