Triumph Adler P-3521DN, Advanced Operation Manual

Page: 94 / 130

2-74 Using the Operation Panel
1
Once you have entered the correct ID in the previous step (ID
(Administrator ID input)), the message display shows
Password
(Administrator password input) and a blinking cursor ( _ ).
2
Press U or V to increase or decrease, respectively, the value at the
blinking cursor. Enter the specified password. Use
Y
and
Z
to move
the cursor right and left. Enter a password consisting of between 0 (no
settings) and 16 numbers.
3
Press [OK] . The Security screen appears.
I/F Block (Interface (external device) block setting)
You can use this to lock and thereby protect the interface. The options
available in Interface Block are as follows:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Option I/F (Network interface card setting)
• USB Storage (USB memory setting)
1
After entering the administrator ID and password, press
U
or
V
repeatedly until
>I/F Block >
appears.
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (USB host). The default
setting is
Unblock
.
1
Press
Z
while
>I/F Block >
is displayed.
2
Press U or V repeatedly until
>>USB Host
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
Block
or
Unblock
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is
Unblock
.
1
Press
Z
while
>I/F Block >
is displayed.
2
Press U or V repeatedly until
>>USB Device
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
Password
_
Note
If you enter the incorrect administrator ID or password,
the message
Wrong ID
or
Wrong Password
appears and
the input screen then reappears. Re-enter the ID or password
correctly.
>I/F Block >
>>USB Host
? Unblock
>>USB Device
? Unblock