Triumph Adler P-3521DN Advanced Operation Manual Download Page 35

Page: 35 / 130

Using the Operation Panel

2-15

Print Fonts List

To help you decide in selecting a font, you can printout lists of the
internal fonts or the optional fonts.

Press

while

Report Print >

is displayed.

Press

repeatedly until

>Print Fonts List

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again. The message

Processing

appears and the

printer prints a list of fonts with a sample and font ID (number) for
each of them.

Print RAM Disk File List

This allows you to print a list of the files on the RAM disk.

IMPORTANT

This is displayed when RAM disk mode is enabled.

Press

while

Report Print >

is displayed.

Press

repeatedly until

>Print RAM Disk File List

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again. The message

Processing

appears and the

printer prints a list of files stored in a RAM disk.

>Print Fonts List ?

>Print RAM Disk

File List ?

Summary of Contents for P-3521DN



































































































































Search results

Summary of Contents for P-3521DN

Reviews:

Related manuals for P-3521DN

Brands by name

Popular brands

Triumph Adler P-3521DN, Advanced Operation Manual

Search results

Summary of Contents for P-3521DN

Reviews:

Related manuals for P-3521DN

Brands by name

Popular brands