Triumph Adler P-3521DN, Advanced Operation Manual

Page: 66 / 130

2-46 Using the Operation Panel
DHCPv6 (DHCPv6 setting)
DHCPv6 is the next-generation of the Internet's Dynamic Host
Configuration Protocol and supports IPv6. It extends the BOOTP startup
protocol that defines the protocols used for transferring configuration
information to hosts on the network.
DHCPv6 permits the DHCP server to use its expanded functionality to
send configuration parameters to an IPv6 node. Because the network
addresses that can be used are allocated automatically, the IPv6 node
management workload is reduced in systems where the administrator
has to exercise close control over IP address allocation.
1
Press
Z
while
>TCP/IP (IPv6) On >
is displayed.
2
Press U or V repeatedly until
>>DHCPv6
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Protocol Detail (Detailed settings for the network
protocol)
This selects the settings for Protocol Detail.
The options available in the Protocol Detail settings are as follows:
• NetBEUI (NetBEUI setting)
• SNMPv3 (SNMPv3 setting)
• FTP (Server) (FTP (Server) setting)
• SNMP (SNMP setting)
• SMTP (SMTP setting)
• POP3 (POP3 setting)
• RAW Port (RAW Port setting)
• LPD (LPD setting)
• HTTP (HTTP setting)
1
Press Z while
Network >
is displayed.
2
Press
U
or
V
repeatedly until
>Protocol Detail >
appears.
NetBEUI (NetBEUI setting)
Selects whether or not to receive documents using NetBEUI.
1
Press Z while
>Protocol Detail >
is displayed.
2
Press U or V repeatedly until
>>NetBEUI
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
>>DHCPv6
? Off
>>NetBEUI
? On