Triumph Adler P-3521DN Advanced Operation Manual Download Page 69

Page: 69 / 130

Using the Operation Panel

2-49

HTTP (HTTP setting)

Select whether or not to communicate using HTTP.

Press

while

>Protocol Detail >

is displayed.

Press

repeatedly until

>>HTTP

appears.

Press

[OK]

. A blinking question mark (

) appears.

Select

Off

using

Press

[OK]

Press

[MENU]

. The display returns to

Ready

Restart Network (Restarting the network card)

After all network related settings have been done, restart the network
card of the device. This is mandatory to make the settings effective.

Press

while

Network >

is displayed.

Press

repeatedly until

>Restart Network

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again. The message

Restarting… Please wait.

appears and the network is restarted.

>>HTTP
? On

>Restart Network ?

Summary of Contents for P-3521DN



































































































































Search results

Summary of Contents for P-3521DN

Reviews:

Related manuals for P-3521DN

Brands by name

Popular brands

Triumph Adler P-3521DN, Advanced Operation Manual

Search results

Summary of Contents for P-3521DN

Reviews:

Related manuals for P-3521DN

Brands by name

Popular brands