Triumph Adler P-3521DN, Advanced Operation Manual

Page: 24 / 130

2-4 Using the Operation Panel
Message Display
The message display on the operation panel shows:
• Status information, the ten messages listed below which are
displayed during normal operation.
• Error codes, when the printer requires the operator’s attention; as
explained in the
Operation Guide .
Status Information
Error Codes
Refer to the Troubleshooting section in the Operation Guide .
Message Meaning
Self test
The printer is performing self-diagnostics after power-up.
Please wait
The printer is warming up and is not ready.
When the printer is switched on for the first time, this message will take several minutes.
Please wait
(Adding toner)
Toner is currently being replenished. This message may be displayed during continuous
printing of a large volume of pages which require a large amount of toner such as with
photographs, etc.
Ready
The printer is ready to print.
Processing
The printer is receiving data to print. This is also shown when the printer is reading a USB
flash memory or RAM disk.
Low Power
The printer is in Low Power Mode. The printer wakes from Low Power Mode whenever a
print job is received. The printer then warms up and goes on-line.
For details on Low Power Mode, refer to
Low Power Timer (Low Power Mode timer
timeout time) on page 2-64 .
Sleeping
The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever a print job is
received. The printer then warms up and goes on-line.
For details on Auto Sleep, refer to
Sleep Timer (Sleep timer timeout time) on page 2-
64 .
Canceling data
Jobs inside the printer are being canceled. To cancel a job, refer to Canceling a Printing
Job on page 2-6 .