Toshiba TR PMIU, User Manual, Page: 59 / 182

49
Step 3. Check option and Click “Upload”, then upload is starts.
When finished, uploaded project is opened by PGMS, and saved as “UPLD.pzm”.
When you check “Logged Data” or “Historical Alarm Data”, uploaded data is stored as “Logg.csv” or
“HistAlarm.csv” in PGMS installation folder. In this case, note that the unit reboots after uploading
project.
Online (This can only USB connection.)
Step 1. Connect PMIU unit to your PC with USB cable.
Step 2. Click of project toolbar, or click “Mode” of menu bar, select “Online”, select “With Upload” or
“Without Upload”.
When you select “With Upload”, PGMS closes current project, and uploads the project that exists in
the PMIU unit automatically. You can switch to this mode by pressing F8 key of your PC.
When you select “Without upload”, PGMS not uploads project. Online monitoring is done by current
opened project.
Step 3. Switch to Online mode automatically, and the window of ladder logic block 1 is opened.
Step 4. When you monitor another ladder block, click “Block” of menu bar, Click “Open” and select block
you open. When you monitor data of tags, click to open Data monitor window (Refer 3.4).
Step 5. When you edit project, press F7 key of your PC, or click “Mode” of menu bar, select “edit”.
TR PGMS switches to OFFLINE mode, and you can edit current project. When you finish editing,
download project again. When you switch offline, click again, or click “Mode” of menu bar, select
“Offline”. Then you can disconnect USB cable.