Toshiba TR PMIU User Manual Download Page 40

Page: 40 / 182

User interface of TR PGMS01

In this chapter, item of screen and menu bar of TR PGMS software is explained. The items of menu bar, toolbar

changes according to the situation.

Overview of window

When you launch TR PGMS, the application window opens with standard toolbars and working platform.

Menu bar

The area containing pull-down menu options.

Tool bar

This contains shortcuts of commands. There are 3 kinds (Project, Layout, and Global).

Project information

Elements that composes the current project is displayed by the tree view form. If each folder (

) is click,

you can access the item. Current access folder is displayed while having opened (

Folder displayed like

contains some items. The content can be progressed by clicking (

Property section (This is not displayed in above example)

A detailed attribute of current object or instruction is displayed.

Menu bar

Project tool bar

Project

information

Workspace

area

Property

section

Global

tool bar

Layout

tool bar

Summary of Contents for TR PMIU























































































































































































Search results

Summary of Contents for TR PMIU

Reviews:

Toshiba TR PMIU, User Manual, Page: 40 / 182

Search results

Summary of Contents for TR PMIU

Reviews: