Toshiba TR PMIU User Manual Download Page 133

Page: 133 / 182

123

Multilingual Text

・

Display

Background Color

Select text background color.

Border

If Yes, borderline is applied to object.

Flash

If Yes, object is always flash.

Font

Set font of text.

Language

Select language.

Text

Set the character string that is displayed.

Text alignment

Set the standard by which the character string is arranged.

Text color

Select text color.

Picture

Display the bit map. Available file format is Windows Bitmap (.bmp), JPEG (.jpg), GIF (.gif).

・

Picture properties

Picture name

Select bitmap file.

Picture type

Picture browser

Search bitmap file from your PC.

Picture library

Search bitmap file from picture library of TR PGMS.

Text

Font of this object is fixed to system, you cannot change. And you can not use the multi language in this object.

But Color/Flash/Visibility animation can be applied to this object.

・

Appearance

Background Color

Select text background color.

Border

If Yes, borderline is applied to object.

Flash

If Yes, object is always flash.

Font

Select font size.

Text

Set the character string that is displayed.

Text color

Select text color.

Summary of Contents for TR PMIU























































































































































































Search results

Summary of Contents for TR PMIU

Reviews:

Toshiba TR PMIU, User Manual, Page: 133 / 182

Search results

Summary of Contents for TR PMIU

Reviews: