Toshiba TR PMIU, User Manual, Page: 165 / 182

155
9 9 9 9. . . .4 4 4 4. . . .2 2 2 2
Setting
Step 1. Set Alarm properties (Project configuration)
Set the following items in Project configuration. Project configuration is displayed by “Project” (menu bar),
“Properties” (Project menu) or click “Change properties” button in alarm setting area. When you finished
setting, click “OK”.
・ Alarm type
16 consecutive words Set consecutive 16 register tags to Alarm register. The address of the register
should be consecutive (for example, BW 016 to BW 031, etc). This is fastest to
display alarm.
16 random words Set 16 registers to Alarm register. The address of the register need not be
consecutive. You can allocate an arbitrary register to every 16 alarms. This is
slower than “16 consecutive alarm” to display.
・ Auto Acknowledge
Acknowledge All All alarms are acknowledged by at same acknowledge bit at once.
Selectable A separate acknowledge bit is defined in each alarm.
・ IF Memory is full
Maximum capacity of alarm memory is 2700 alarms. If alarm memory is full, alarm operates as follows.
Erase previous Alarms and starts logging from beginning
Old alarm is overwritten by new alarm.
Stop logging
Alarm logging is stopped. If alarm is cleared, Alarm logging is restarted.
Alarm
type
Auto
Acknowledge
Memory Full
operation