Toshiba TR PMIU, User Manual, Page: 57 / 182

47
Download
Step 1. Connect PMIU unit to your PC with USB cable or Serial cable. If you use serial port, serial cable
should be connected between COM1 port of PMIU unit and RS232C port of your PC.
Step 2. Click of project toolbar, or click “Project” of menu bar, Select “Transfer”, click “Download”.
Then following window is displayed. Set options.
Mode Select USB or serial. If you select serial, Select COM port and set communication
settings of your PC.
Download options Check the item that you transfer to PMIU unit.
Firmware When you use new unit for the first time, or edit communication, alarm or data
logger settings
Application When you edit unit settings excluding ladder
Ladder When you edit Ladder logic block
Data You can download edited data by Data monitor. Refer 3.4.
Device settings
Automatically put unit in halt mode before download
The mode of PMIU unit is changed to HALT mode before downloading project automatically.
Automatically put unit in run mode before download
The mode of PMIU unit is changed to RUN mode after downloading project automatically.
If check is removed, unit become HALT mode after downloading even if RUN/HALT switch is
RUN position.
Initialize keep memory area after download
Back up memory area of PMIU unit is initialized after downloading (data of there is cleared).
Initialize all device register except keep memory area after download
All registers and devices of PMIU unit is cleared except back up memory area.