Toshiba TR PMIU User Manual Download Page 12

Page: 12 / 182

What is TR PMIU series?

Thank you for purchasing TR PMIU series. TR PMIU series is graphical color touch panel unit that ladder logic

function is built into. All models have serial communication port, and some models has Expansion slot for IO unit.

Moreover, they have data logger and alarm function. The display, the operation, and the control of a small-scale

machine can be handled with this one. This will replace many switches, timers, and relays used of your

machine/system.

Requirement

Following things are necessary for developing TR series.

Personal computer (PC)

PGMS01

programming

software

requires

IBM

PC/AT

Compatible

system

that

has

Pentium

Ⓡ

800MHz or equivalent CPU, 256MB of RAM, 800MB of HDD free space, Windows OS (Windows

Ⓡ

2000

SP4, Windows

Ⓡ

XP Professional SP2 or Home edition SP2) , Display (800x600 High-color 16bit),

Keyboard and mouse, one USB or RS232C Serial port (We recommend USB port).

TR PGMS01 software

You must install this software before start development. All settings of the TR series are done from this.

DC 24V Power supply

Power source of all TR series. The power of most digital Expansion I/O unit is supplied from PMIU unit,

but the Expansion I/O units that has relay output or analog I/O requires specially power supply for relay

coil/AD converter. Protect the power supply with the circuit breaker for safety.

USB cable (type A male/type B male) or Serial cable

USB connection is recommended. Serial communication (RS233C) is more low-speed than USB, and the

function is limited. If you want to connect by serial communication, refer

Append. C.

Device necessary for debugging or check of operation

Expansion I/O unit, Tools, wiring material, device connected with TR unit, etc. Developing as much as

possible in a near environment facilitates developing, and decreases the trouble. The device actually

used is recommended to be prepared as much as possible.

About TR PGMS01

TR PGMS01 is setting and programming software for the all TR series. This can use all TR series including TR

PMIU series touch panel monitor and Expansion I/O unit for it.

Installation and uninstallation of TR PGMS is similar to general Windows software. To start setup, click

“setup.exe” in program folder, then set up wizard is started. When the installation is completed, reboot your PC.

To remove TR PGMS from your computer, open the control panel of Windows, and select "Add or remove

programs", "Change or remove programs".

We recommend this software to be used in an English environment. Some functions (function related to display

and language) might not be able to be used normally under 2bytes character (language chiefly used in east Asia,

Middle East, etc) environment.

Summary of Contents for TR PMIU























































































































































































Search results

Summary of Contents for TR PMIU

Reviews:

Toshiba TR PMIU, User Manual, Page: 12 / 182

Search results

Summary of Contents for TR PMIU

Reviews: