Toshiba TR PMIU User Manual Download Page 43

Page: 43 / 182

Edit

Undo

Cancel operation done just before.

Redo

Repeat operation done just before.

Cut

Cut current selected object to clipboard.

Copy

Copy current selected object to clipboard.

Paste

Paste object of clipboard to screen.

Select

All object of current screen is selected.

Make Group

Make 2 or more objects to single group object.

Break Group

Break group object to 2 or more objects.

Bookmarks

Set bookmark to current screen. Refer

8.3.3.

Tools

Application Memory Status

Details of the memory capacity are displayed. Refer

3.2.5.

Display Logged data

Uploaded logged data is displayed by using spread-sheet software.

This function is available when logged data is uploaded. Refer

3.2.4.

Display Historical Alarm Data

Display the data of Historical Alarm. Refer

3.2.4.

Convert Application

Current project is converted for another model. Refer

3.2.6.

Preferences

Colors

Set color of Online ladder monitor and ladder editing

mode. Refer

3.2.7

Online communication

Set communication method between PMIU unit and PC.

Others

Set display of ladder editing mode and ladder editing

mode. Refer

3.2.8.

Summary of Contents for TR PMIU























































































































































































Search results

Summary of Contents for TR PMIU

Reviews:

Toshiba TR PMIU, User Manual, Page: 43 / 182

Search results

Summary of Contents for TR PMIU

Reviews: