manualshive.com logo in svg

Toshiba Tecra M9, Maintenance Manual

Share
Download
Toshiba Tecra M9 Maintenance Manual Download Page 219

3.31 SETUP 

3  Tests and Diagnostics 

Use this option to set a time and date for automatic power on and enable or 
disable the ring indicator feature. 

Alarm Date Option

 appears only when 

Alarm Time 

is enabled. 

 

 

 

 

Set the parameters for the Auto Power On (automatic power on) function and 
the Wake-up on LAN in the “OPTIONS” window. To set the time, use 

Space

 

or 

BackSpace

. Press 

↓

 to move the cursor to the right and 

↑

 to move the 

cursor to the left when you set the date and time. 

For the 

Alarm Time

, set the time to turn on the power automatically. The 

“second” cannot be set. When it is set to “Disabled”, the time to turn on 
automatically is not set. 

The 

Wake-up on LAN

 is a function to turn on the power automatically by the 

call from the administrator. It can be set to “Enabled” only when “Built-in 
LAN” is set to “Enabled”. To activate this function, use the AC adapter. 

On Battery 
The following settings can be changed when the Wake-up on LAN is Enabled.  

Enabled

   

 

Wake-up on LAN function whenoperating from the battery. 

Disabled

   

 

Wake-up on LAN function whenoperating from the battery 
(Default).

 

 

NOTE:

  1. Do not remove the AC adapter and battery pack at the same time when you use 

this feature.  If you do so, data saved by the resume function will be lost.  You 
must also reset this option. 

   

 

2. When a password is set in Password Security, the system is in standby mode, 

the Timer on function (Auto Power PN) is set and the system is booted, 
“Password =” is displayed. When the password set in Password Security is 
input, the computer returns to Windows from standby mode.  

   

  3. This function is effective only once, it is released after booting up. 

Alarm Time 

= Disabled 

 

Wake-up on LAN 

= Disabled 

on Battery 

= Disabled 

Critical Battery Wake-up

 = 

Enabled

 

OPTIONS

TECRA M9 Maintenance Manual (960-631) 

[CONFIDENTIAL] 

3-93 

Summary of Contents for Tecra M9































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands