Toshiba e-studio 2555c, Service Manual

Page: 659 / 1558

8
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8 - 103
[EAB1] Short paper jam in Saddle Stitch Finisher
MJ-1108
Entrance motor (M1) • Motor check(M1)
• Connector check(CN26)
• Harness check
Interface PC board (I/F) • Board check
• Connector check(CN1, CN2, CN5, CN7, CN8)
• Harness check
Saddle stitcher controller board • Board check
• Connector check(CN10, CN13, CN20)
• Harness check
Replace parts Remarks
Junction box paper detection sensor
(S26)
Feeding sensor (S22)
Transport path-2 (S27)
Transport path-3 (S28)
Ejecting roller (S29)
Entrance motor (M1)
Transport path switching solenoid
(SOL9)
Interface PC board (I/F)
Saddle stitcher controller board
Finisher controller board
Classification Error item
Finisher jam
(Saddle stitcher section) Short paper jam in Saddle Stitch Finisher
Check item Measures
Finisher, saddle stitcher • Check if there is any paper in the finisher, saddle stitcher
or the on the transport path of the equipment. Remove it if
there is.
• Use paper accepted in the specifications.
Feeding sensor • Sensor check (S22)
• Connector check
• Harness check
Junction box paper detection sensor • Sensor check (S26)
• Connector check (CN8)
• Harness check
Transport path-2 sensor • Sensor check (S27)
• Connector check (CN20)
• Harness check
Transport path-3 sensor • Sensor check (S28)
• Connector check (CN20)
• Harness check
Check item Measures