Toshiba e-studio 2555c, Service Manual

Page: 492 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 66
6.3.18 Density adjustment of graphic lines (1200 dpi)
This adjustment is available regardless of whether "Distinguish Thin Lines" of the printer driver is
selected or not.
<Adjustment Mode (05)>
Notes:
Be sure to set the values of the upper and lower limit properly so that they are not set in reverse.
The line density adjustment codes with black (8242-0, 8243-0 and 8243-1) are in common for
both the color and black modes.
<Procedure>
The procedure is the same as that of

P. 6-54 "6.3.2 Gamma balance adjustment (Black Mode)".
Color mode Code Remarks
Color/Black 8242-0 The density of the line in Black in the line density range specified
by "05-8243-0" or "05-8243-1" can be adjusted.
The larger the value is, the darker the line density becomes.
Acceptable value: 0 to 5 (Default: 3)
8242-1 The density of the line in Yellow, Magenta, Cyan, and Black in
the line density range specified by "05-8243-2" or "05-8243-3"
can be adjusted.
The larger the value is, the darker the line density becomes.
Acceptable value: 0 to 5 (Default: 1)
Color mode Code Remarks
Color/Black 8243-0
The effective range (lower limit) of the
density adjustment for the line in Black can
be set.
Acceptable value: 0 to 255 (Default: 1)
The density range
selected in the
upper and lower
limit is adjusted with
05-8242-0.
8243-1
The effective range (upper limit) of the
density adjustment for the line in Black can
be set.
Acceptable value: 0 to 255 (Default: 200)
8243-2
The effective range (lower limit) of the
density adjustment for the line in Yellow,
Magenta, Cyan, and Black can be set.
Acceptable value: 0 to 255 (Default: 1)
The density range
selected in the
upper and lower
limit is adjusted with
05-8242-1.
8243-3
The effective range (upper limit) of the
density adjustment for the line in Yellow,
Magenta, Cyan, and Black can be set.
Acceptable value: 0 to 255 (Default: 255)