Toshiba e-studio 2555c, Service Manual, Page: 1260 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
Mode Process LED Factor setting for LED
sub-line emission time 1200dpi 2622 2 Normal speed C 15 8-36 M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value. 4
08 Setting
Mode Process LED Factor setting for LED
sub-line emission time 1200dpi 2622 3 Normal speed K 15 8-36 M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value. 4
08 Setting
Mode Process LED Factor setting for LED
sub-line emission time 1200dpi 2622 4 Decelerating Y 15 8-36 M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value. 4
08 Setting
Mode Process LED Factor setting for LED
sub-line emission time 1200dpi 2622 5 Decelerating M 15 8-36 M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value. 4
08 Setting
Mode Process LED Factor setting for LED
sub-line emission time 1200dpi 2622 6 Decelerating C 15 8-36 M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value. 4
08 Setting
Mode Process LED Factor setting for LED
sub-line emission time 1200dpi 2622 7 Decelerating K 15 8-36 M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value. 4
23