Toshiba e-studio 2555c, Service Manual

Page: 448 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 22
[F] Right margin
(1) While pressing [0] and [5] simultaneously, turn the power ON.
→
(Adjustment Mode)
(2) Open the platen cover or RADF.
(3) Press [FAX]
→
[START] to make a copy at the mode of A3/LD, 100%, Full color, Text/Photo and
2nd drawer.
(4) Measure the blank area F at the right side of the copied image.
(5) Check if the blank area F is within the range.
(6) If not, use the following procedure to change values and repeat the steps 3. to 5. above.
<Procedure>
(Adjustment Mode)
→
(Key in the code [4052])
→
[START]
→
(Key in a value (acceptable values: 0 to 255))
→
[OK] or [INTERRUPT] (Stored in memory).
→
(“100% A” is displayed.)
* The larger the adjustment value is, the wider the blank area at the right side becomes
(approx. 0.04 mm/step).
Fig.6-17
Function Black Color
Copy 2±2.0 mm 2±2.0 mm
F
Feeding direction