Toshiba e-studio 2555c, Service Manual

Page: 474 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 48
Notes:
Be sure that this adjustment is made after performing

P. 6-27 "6.2.1 Automatic gamma
adjustment".
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button. (e.g. 7665)
(3) Key in a value to adjust the color.
0: Red
1: Yellow
2: Green
3: Cyan
4: Blue
5: Magenta
(To correct a value once keyed in, press the [CLEAR] button.)
(4) Press the [OK] or [INTERRUPT] button to store the value.
→
The equipment goes back to the
ready state.
(5) Repeat step (2) to (4) to make the setting again.
(6) Press the [FAX] button and then press the [START] button to make a test copy.
(7) If the desired image quality has not been attained, repeat step (2) to (6).
7671-2
Red seal color
Green The larger the value, the darker the
cyan becomes. The smaller the value,
the darker the yellow becomes. Acceptable value: 0 to
255
Default value: 128
7671-3
Red seal color
Cyan The larger the value, the darker the blue
becomes. The smaller the value, the
darker the green becomes.
7671-4
Red seal color
Blue The larger the value, the darker the
magenta becomes. The smaller the
value, the darker the cyan becomes.
7671-5
Red seal color
Magenta The larger the value, the darker the red
becomes. The smaller the value, the
darker the blue becomes.
Code Original mode
Item to be
adjusted
Description Remarks