Toshiba e-studio 2555c, Service Manual

Page: 1262 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
mode Process Developm
ent Toner density ratio
manual offset control C 2707 2 C 0 0-8 M 0: Disabled 1: +4bit 2: +7bit 3: +10bit 4: +14bit 5: -
4bit 6: -7bit 7: -10bit 8: -14bit
When setting the value of this code to other than "0",
set the value of 08-2506 (Enable/disable setting of toner
density correction control) to "0" (Disabled). 4
08 Setting
mode Process Developm
ent Toner density ratio
manual offset control K 2707 3 K 0 0-8 M 0: Disabled 1: +4bit 2: +7bit 3: +10bit 4: +14bit 5: -
4bit 6: -7bit 7: -10bit 8: -14bit
When setting the value of this code to other than "0",
set the value of 08-2506 (Enable/disable setting of toner
density correction control) to "0" (Disabled). 4
08 Setting
Mode Scanner 3015 Pre-scan setting
switchover 0 0-1 SYS 0: Not performing pre-scanning
1: Performing pre-scanning
1 Yes
08 Setting
Mode Scanner RADF 3021 Set for switchback-
mixed size copy 0 0-1 SYS This setting is whether the original length is detected or
not by transporting without scanning in reverse when
A4-R/FOLIO paper or LT-R/LG paper is detected in a
mixed size copying.
0: Disabled -
AMS:
A series - Judges as A4-R without transporting in
reverse with no scanning.
LT series - Judges whether it is LT-R or LG by its length
without transporting in reverse with no scanning.
APS:
A series - Judges whether it is A4-R or FOLIO without
transporting in reverse with no scanning.
LT series - Judges whether it is LT-R or LG without
transporting in reverse with no scanning.
1: Enable 1
AMS:
A series - Judges whether it is A4-R or FOLIO by
Transporting without scanning in reverse to detect its
length.
LT series - Judges whether it is LT-R or LG by
transporting without scanning in reverse to detect its
length.
APS:
The same as that of APS in 0: Disabled.
1 Yes
08 Setting
Mode Scanner 3025 Correction of carriage
position 2 0-2 SYS 0: No correction
1: Performs correction before scanning
2: Performs correction after scanning
1
25