Toshiba e-studio 2555c, Service Manual

Page: 1323 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
mode Process Fuser Print speed
switchover control at
low temperature 5476 1 Recycled paper 0 0-5 M Use this code to change the color print speed for
A4/LT/B5 size at low temperature, or when defective
fusing occurs. When the value is set to "0" or "1",
defective fusing may occur for thick paper.
0: Disabled 1: Intermittent mode (color) 2:
Intermittent/speed change mode (color) 3: Speed
change mode 1 (color) 4: Speed change mode 2 (color)
5: Speed change mode (black/color)
* This code is valid for 45/50ppm only. 4
08 Setting
mode Process Fuser Print speed
switchover control at
low temperature 5476 2 Thin paper 0 0-5 M Use this code to change the color print speed for
A4/LT/B5 size at low temperature, or when defective
fusing occurs. When the value is set to "0" or "1",
defective fusing may occur for thick paper.
0: Disabled 1: Intermittent mode (color) 2:
Intermittent/speed change mode (color) 3: Speed
change mode 1 (color) 4: Speed change mode 2 (color)
5: Speed change mode (black/color)
* This code is valid for 45/50ppm only. 4
08 Setting
mode Process Fuser 5477 Fuser belt type setting 1 0-1 M 0: type1 1: type2
* Normally do not change this setting. When the fuser
belt without lot number is replaced with the one with a
lot number, change the value from "0" to "1". The lot
number is printed on the gear on the front side of the
fuser belt. 1
08 Setting
Mode Counter Maintenan
ce PM counter M 5550 Setting value Refer to
contents
8 digits M Sets the threshold for displaying a message for PM
timing.
0: Not displayed
<Default>
30ppm: 60000
35ppm: 70000
45ppm: 75600
50ppm: 84000
25ppm: 50000
[Unit: page] 1
86