Toshiba e-studio 2555c, Service Manual

Page: 1084 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
05 Adjustmen
t mode Process Transfer Setting value of 2nd
transfer restraining
current 2 2964 1 Decelerating 4 -50-25 M (Unit:
μ
A) 4
05 Adjustmen
t mode Process Transfer Enforced toner supply
/ Number of time of
cleaning at the end of
fusing-wait period 2966 0 Normal speed / High
speed 2 0-7 M 0: Once 1: Twice 2: 3 times 3: 5 times 4: 7 times 5:
10 times 6: 12 times 7: 15 times 4
05 Adjustmen
t mode Process Transfer Enforced toner supply
/ Number of time of
cleaning at the end of
fusing-wait period 2966 1 Decelerating 2 0-7 M 0: Once 1: Twice 2: 3 times 3: 5 times 4: 7 times 5:
10 times 6: 12 times 7: 15 times 4
05 Adjustmen
t mode Scanner Scanner Image location
adjustment 3030 Primary scanning
direction 113 0-255 SYS When the value increases by "1", the image shifts by
approx. 0.0423 mm toward the front side of the paper.
1 Yes
05 Adjustmen
t mode Scanner Scanner Image location
adjustment 3031 Secondary scanning
direction 130 67-189 SYS When the value increases by "1", the image shifts by
approx. 0.08192 mm toward the trailing edge of the
paper.
*If the value of 05-3031 is changed, the values of 05-
3046 and 05-3047 are also changed. However, the
value of 05-3031 is not changed even if the values of
05-3046 and 05-3047 are changed. When the value of
05-3031 is changed, confirm the values of 05-3046 and
05-3047. When adjusting 05-3031, 05-3046, and 05-
3047, adjust 05-3031 first, then adjust 05-3046 and 05-
3047.
1 Yes
05 Adjustmen
t mode Scanner Scanner Reproduction ratio
adjustment 3032 Adj. secondary
scan.direction 128 0-255 SYS When the value increases by "1", the reproduction ratio
in the secondary scanning direction (vertical to paper
feeding direction) increases by approx. 0.017%.
1 Yes
05 Adjustmen
t mode Scanner Scanner 3033 Distortion mode - - SYS Moves carriages to the adjustment position. 6 Yes
05 Adjustmen
t mode Scanner Scanner Shading position
adjustment 3034 Original glass 117 71-186 SYS 0.08192mm/step 1
05 Adjustmen
t mode Scanner Scanner Shading position
adjustment 3035 RADF 133 71-186 SYS 0.08333 mm/step 1
05 Adjustmen
t mode Scanner RADF Adjustment of RADF
paper alignment 3040 Single sided original 12 0-30 SYS When the value increases by "1", the aligning amount
increases by approx. 0.4 mm.
1
25