Toshiba e-studio 2555c, Service Manual

Page: 1306 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
Mode Printer Finisher Batch read-in of
adjustment value 4696 MJ-1036 - - M Copies and saves all the adjustment values of the
finisher to the equipment for the replacement of the
finisher control PC board due to damage.
* This code is not supported by LL20/25ppm model. 3 Yes
08 Setting
mode Printer Paper
feeding 4698 Paper size (ISO-B5-
R) feeding/widthwise
direction 250/176 148-
432/105-
297
M 10
08 Setting
mode Printer Paper
feeding 4699 Paper size (KAKU2-R)
feeding/widthwise
direction 332/240 148-
432/105-
297
M 10
08 Setting
mode Printer Maintenan
ce Waste toner box 4700 Detection setting of
nearly-full status 3 0-6 M Sets the value for judging nearly-full state after the
waste toner amount detection sensor detects waste
toner. Select the appropriate value if the detection error
occurs.
0: 0 (Judged as nearly-full state right after the detection
of the sensor)
1: 23670(30ppm), 22000(35ppm), 17000(45ppm),
14330(50ppm), 25670(25ppm)
2: 29580(30ppm), 27500(35ppm), 21250(45ppm),
17920(50ppm), 32080(25ppm)
3: 71000(30ppm), 66000(35ppm), 51000(45ppm),
43000(50ppm), 77000(25ppm)
4: 88750(30ppm), 82500(35ppm), 63750(45ppm),
53750(50ppm), 96250(25ppm)
5: 106500(30ppm), 99000(35ppm), 76500(45ppm),
64500(50ppm), 115500(25ppm)
6: Nearly-full detection is disabled 1 Yes
08 Setting
mode Printer Maintenan
ce Display of details of
CE80 4706 0 Y 0 0-15 M Displays the details of CE80. Enter "0" to clear the
error.
0=Normal, 1=Error
bit0: Not connected
bit1: Mix
bit2: Checksum mismatch
bit3: Gradation module error 4
69