Toshiba e-studio 2555c, Service Manual

Page: 568 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 12
EA90 Finisher jam
(Saddle stitcher
section) Door open jam: The delivery cover or inlet
cover has opened during printing. [MJ-1108] P. 8-101
EAA0
Paper remaining in Saddle Stitch Finisher:
Paper remaining in Saddle Stitch Finisher [MJ-
1108]
P. 8-101
EAB0 Paper transport jam in Saddle Stitch Finisher:
Paper transport jam in Saddle Stitch Finisher
[MJ-1108] P. 8-102
EAB1 Short paper jam: Short paper jam (Saddle
Stitch Finisher) [MJ-1108] P. 8-103
EAD0 Other paper jam Print end command time-out jam: The printing
has not finished normally because of an error
occurring on the interface between the SYS
board and the engine firmware at the end of
printing. P. 8-107
EAE0 Receiving time time-out jam: The printing has
been interrupted because of the
communication error between the equipment
and finisher when the paper is transported from
the equipment to the finisher. P. 8-107
EAF1 Finisher jam Stack exit roller nip home position detection
error [MJ-1036] P. 8-100
EB30 Other paper jam Ready time time-out jam: The equipment
judges that the paper transport to the finisher is
disabled because of the communication error
between the equipment and finisher at the start
of printing. P. 8-107
EB50 Paper transport jam Paper remaining on the transport path: The
multiple feeding of preceding paper caused the
misfeeding of upcoming paper. P. 8-57
EB60 Paper remaining on the transport path: The
multiple feeding of preceding paper caused the
misfeeding of upcoming paper (redetection
after no jam is detected at [EB50]). P. 8-59
Error code Classification Contents Troubleshooting