Toshiba e-studio 2555c, Service Manual

Page: 449 / 1558

6
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6 - 23
[G] Bottom margin
(1) While pressing [0] and [5] simultaneously, turn the power ON.
→
(Adjustment Mode)
(2) Open platen cover or RADF.
(3) Press the [FAX]
→
[START] to make a copy at the mode of A3/LD, 100%, Full color, Text/Photo
and 2nd drawer.
(4) Measure the blank area G at the trailing edge of the copied image.
(5) Check if the blank area G is within the range.
(6) If not, use the following procedure to change values and repeat the steps 3. to 5. above.
<Procedure>
(Adjustment Mode)
→
(Key in the code [4053])
→
[START]
→
(Key in value (acceptable values: 0 to 255))
→
[OK] or [INTERRUPT] (stored in memory)
→
(“100% A” is displayed.)
* The larger the adjustment value is, the wider the blank area at the trailing edge becomes
(approx. 0.04 mm/step).
Fig.6-18
Function Black Color
Copy 3±2.0 mm 3±2.0 mm
G
Feeding direction