Toshiba 3200 User Manual Download Page 61

Page: 61 / 312

Connecting Hardware Devices

Cooling fans

If the server also has a redundant exhaust fan installed, remove it by disengaging
the two hooks of the exhaust fan module.

Removing the redundant exhaust fan module

The primary exhaust fan is directly fitted inside the fan duct. See the illustration

Location of system cooling fans

on page 34 for placement of the primary exhaust

fan.

Remove the primary exhaust fan from the exhaust fan module, and replace it with a
new fan.

Position the exhaust fan module in the server and secure it to the chassis with two
screws.

Installing the exhaust fan module (non-redundant fan configuration shown)

Summary of Contents for 3200

























































































































































































































































































































Search results

Summary of Contents for 3200

Reviews:

Related manuals for 3200

Brands by name

Popular brands

Toshiba 3200, User Manual

Search results

Summary of Contents for 3200

Reviews:

Related manuals for 3200

Brands by name

Popular brands