Toshiba 3200 User Manual Download Page 202

Page: 202 / 312

Management Software

Using HarnessEye/web

202

Back Up tab

When you click the Back Up tab, the following screen displays.

In this frame, you can set the SEL file backup options. Automatic backup and manual
backup can both be set.

Automatic backup

Select the Do Automatic Backup check box to enable automatic backup

Specify the maximum size allowed for the backup file.

Click the Set button to save the settings.

Manual backup

In addition to automatic backup, you can also make backup files manually.

Specify the header of the backup file by editing header information in the edit box.

Click the Set button to perform the manual backup. A backup file is then made with
the specified header.

Item

Explanation

Automatic

Sets automatic backup options.

Do Automatic Backup

Specifies whether to enable automatic backups.

Maximum log size

Specifies the maximum size of the backup file in kilobytes.

Set

Saves the specified settings.

Manual

Specifies and performs a manual backup.

Header Information

Specifies header information for the backup file.

Set

Performs a manual backup.

Summary of Contents for 3200

























































































































































































































































































































Search results

Summary of Contents for 3200

Reviews:

Related manuals for 3200

Brands by name

Popular brands

Toshiba 3200, User Manual

Search results

Summary of Contents for 3200

Reviews:

Related manuals for 3200

Brands by name

Popular brands