Getting Started
Removing and replacing the server panels
31
Removing and replacing the server panels
To remove the front panel:
1
Release the door lock and open the upper and lower doors as a single unit.
2
Lift the lower panel to unhook its hinges and remove it from the server.
Removing the front panel
To install optional devices inside the server, you need to remove the side panel if your
server is a pedestal model, or the top panel, if your server is a rack model.
Removing the side panel
(pedestal model)
To remove the side panel:
1
Shut down the server, turn off the power, and unplug the power cable.
2
Turn the side panel lock counter-clockwise to release it.
WARNING: Before removing or replacing a server panel, always turn off the power
using the button on the back of the server and unplug the power cable (EPS-R
models).
CAUTION: When sliding off a server panel, be careful not to catch your finger
between it and the server.
Summary of Contents for 3200
Page 1: ... ...
Page 309: ...309 ...
