Toshiba 3200 User Manual Download Page 30

Page: 30 / 312

Getting Started

Front of the server

Floppy disk drive (FDD)

The floppy disk drive supports 3.5-inch double-density (720 KB) and high-density
(1.44 MB) diskettes.

Activity indicator - Illuminates whenever the floppy disk drive reads or writes data.

Eject button - Releases the diskette from the drive.

CAUTION: To avoid losing or corrupting data stored on the diskette, never press the
eject button while the FDD activity indicator is on.

Remove the diskette from the floppy disk drive whenever the drive is not in use.

Eject

Activity

indicator

button

Summary of Contents for 3200

























































































































































































































































































































Search results

Summary of Contents for 3200

Reviews:

Related manuals for 3200

Brands by name

Popular brands

Toshiba 3200, User Manual

Search results

Summary of Contents for 3200

Reviews:

Related manuals for 3200

Brands by name

Popular brands