TLV SC-F71, Instruction Manual

Page: 155 / 390

172-65710M-04 (SC-F71 Parameters/Functions) 23 Dec 2021
154

Scaling the Retransmission output
Set high and low limits for the Retransmission output. The scale range depends on
the type of the selected Retransmission output.
No retransmission output, Input 1_Measured value (PV), Input 1_Local SV, Input 1_
SV monitor value and Remote setting input value:
Input 1_Input range low to Input 1_
Input range high
(When Control with PV select: PV select input range low to PV select input range high)
[Varies with the setting of the Decimal point position.]
Input 1_Deviation: -(Input 1_Input span) to +(Input 1_Input span)
[Varies with the setting of the Decimal point position.]
Input 2_Measured value (PV), Input 2_Local SV and Input 2_SV monitor value: Input 2_
Input range low to Input 2_Input range high
[Varies with the setting of the Decimal point position.]
Input 2_Deviation: -(Input 2_Input span) to +(Input 2_Input span)
[Varies with the setting of the Decimal point position.]
Manipulated output value: -5.0 to +105.0%
Measured value (PV) of differential temperature input: -(Input 1_Input span) to +(Input
1_Input span)
[Varies with the setting of the Decimal point position.]
Parameter setting

Retransmission output 1 type [Engineering Mode: Function block No. 31 (
Fn31
)]
Parameter symbol Data range Factory set value
AO 1
0: No retransmission output
1: Input 1_Measured value (PV)
2: Input 1_Local SV
3: Input 1_SV monitor value
4: Input 1_Deviation
5: Input 1_Manipulated output value [heat-side]
6: Input 1_Manipulated output value [cool-side]
7: Input 2_Measured value (PV)
8: Input 2_Local SV
9: Input 2_SV monitor value
10: Input 2_Deviation
11: Input 2_Manipulated output value
12: Remote setting input value
13: Measured value (PV) of differential temperature input
0
Refer to “4. Parameters that are Initialized/Modified when Setting is Changed”
for the parameters that are initialized when the Retransmission output 1 type is
changed.