TLV SC-F71, Instruction Manual

Page: 49 / 390

172-65710M-04 (SC-F71 Parameters/Functions) 23 Dec 2021
48
77
2.SVRd
Input 2_Setting change
rate limiter (down)
5)
★
0 to Input 2_Input span
0: No function
[Varies with the setting of the Decimal
point position.] 0
78
2.A/M.A
Input 2_Auto/Manual
transfer selection (Area)
6)
★
0: No transfer
1: Auto mode (bumpless)
2: Auto mode (bump)
3: Manual mode (bumpless)
4: Manual mode (bump) 0
79
2. MV.A
Input 2_Manipulated
output value (Area)
6)
★
-5.0 to +105.0%
[When settings either 2: Auto mode
(bump) or 4: Manual mode (bump) is
selected in Input 2_Auto/Manual transfer
selection (Area)] -5.0
80
R/L.A
Remote/Local transfer
selection (Area)
7)
★

When “Remote setting input” is selected
at Select function for Input 2
8)
0: No transfer
1: Local mode
2: Remote mode
0

When “Cascade control” is selected at
Select function for input 2
9)
0: No transfer
1: Single control
2: Cascade control

When “Control with PV select” is
selected at Select function for input 2
10)
0: No transfer
1: Input 1
2: Input 2

When “2-loop control/Differential
temperature control” is selected at
Select function for input 2
11)
0: No transfer
1: 2-loop control
2: Differential temperature control
★
Data included in Memory area
1)
Displayed when "Soft start" is selected in "Soft start/setting change rate limiter selection" in Function block No. 70: Memory area
function (
AREA
).
2)
Displayed when "Setting change rate limiter" is selected in "Soft start/setting change rate limiter selection" in Function block No. 70:
Memory area function (
AREA
).
3)
Not displayed when "Pressure control operation [MC-(V)COS(R)]" is selected in "Input 1_Control action".
4)
Displayed when "2-loop control/Differential temperature control" or "Cascade control" is selected in "Select function for Input 2",
AND "Soft start" is selected in "Soft start/setting change rate limiter selection" in Function block No. 70: Memory area function
(
AREA
).
5)
Displayed when "2-loop control/Differential temperature control" or "Cascade control" is selected in "Select function for Input 2" AND
"Setting change rate limiter" is selected in "Soft start/setting change rate limiter selection" in Function block No. 70: Memory area
function (
AREA
).
6)
Displayed when "2-loop control/Differential temperature control" is selected in "Select function for Input 2" AND "Pressure control
operation [MC-(V)COS(R)]" is not selected in "Input 2_Control action".
7)
Displayed when one of "Remote setting input", "Cascade control", "Control with PV select", or "2-loop control/Differential
temperature control" is selected AND in the case of "2-loop control", "PID control" or "Heating/Cooling PID control" is selected in
both Input 1_ Control action and Input 2_Control action.
8)
Displayed when
“Remote setting input” is selected in “Select function for Input 2”.
9)
Displayed when “Cascade control” is selected in “Select function for Input 2”.
10)
Displayed when “Control with PV select” is selected in “Select function for Input 2”.
11)
Displayed when "2-loop control/Differential temperature control" is selected, AND in the case of "2-loop control", "PID control" or
"Heating/Cooling PID control" is selected in both Input 1_Control action and Input 2_Control action.