Thermo Scientific FOCUS GC, Instruction Manual

Page: 14 / 356

About This Manual Overview
xiv Instruction Manual
Chapter 10, Autosamplers , describes how to program and control the AS 2000
autosampler and the AI 3000/AS 3000 by using the FOCUS GC keypad. This
chapter contains also the instructions to programming a sample sequence with the
FOCUS GC keypad when an AS 2000 or an AI 3000/AS3000 is used and how to
set up ranges of samples to run automatically.
Chapter 11, Getting Started , contains instructions to operate with your FOCUS
GC through the instrument keypad. We also included instructions to program a
Run Time Events and the instrument start-up.
Chapter 12, Checkout Using FID with S/SL , contains the operating procedure to
check the Flame Ionization Detector with the Split/Splitless Injector (S/SL).
Chapter 13, Checkout Using TCD with S/SL , contains the operating procedure to
check the Thermal Conductivity Detector (TCD) with the Split/Splitless Injector
(S/SL).
Chapter 14, Checkout Using TCD with PPKD , contains the operating procedure
to check the Thermal Conductivity Detector (TCD) with the Purged Packed
Injector (PPKD).
Chapter 15, Maintenance and Troubleshooting , contains information and
operating sequences to perform the necessary maintenance of the instrument and
also information concerning troubleshooting in case of malfunctioning.
Chapter 16, LAN Option Set-up , contains notes on how to set-up and start using
the FOCUS GC with the LAN (Local Area Network) option.
Appendix A , Customer Communication , contains contact information for Thermo
Fisher Scientific offices worldwide. Use the Reader Survey in this section to give
us feedback on this manual and help us improve the quality of our documentation.
The Glossary contains definitions of terms used in this manual. This also includes
abbreviations, acronyms, metric prefixes, and symbols.
The Index contains an alphabetical list of key terms and topics in this guide,
including cross references and the corresponding page numbers.