![background image](http://html1.mh-extra.com/html/thermo-king/098203/098203_maintenance-manual_1104405060.webp)
Operating Instructions
58
Lock Padlock
If PADLOCK is active technician must enter
correct key (number) to unlock display. PADLOCK OPTION
must be selected ON under the CONFIGURATION/UNIT SETTING for it to be active or visible.
Figure 25: Lock Padlock
Controller Back-up Battery
Every Controller has a Back-up Battery. This will allow the controller to be energized if the unit is not
connected to shore power. The technician can change settings in the controller - Setpoint, etc.
Press the ON/OFF key, the controller will energize and stay energized for 25 sec, by pressing any of the
Menu keys the 25 sec timer will reset to 20 sec.
Controller Lockup Issue
There have been reports of MP4000 controllers with 2.5.4.0 software, not restarting while changing
power sources without turning unit off. If a controller is found with no display and unit not running,
follow this procedure.
1. Unplug the unit or turn OFF the main circuit breaker in the control box.
2. Disconnect the battery found on the back side of the controller.
3. Wait 30 seconds then plug in the battery.
4. Plug in unit or turn the main CB back ON.
5. Turn unit ON by pressing the ON key.
6. Controller will now restart.
Install the latest MP4000 software (3.1.0.0 or later) in the controller before releasing unit. If unit has
2.5.4.0 software or older than you need to install 3.0.0.0 software before you can load 3.1.0.0.
The latest software can be found on the Thermoking.com web site under iService/Global Marine Solution
Info Central/Software Updates/MP4000/CM4000 Load to SD Card.zip. Be sure to download the zip file
to your computer to unzip it, DO NOT unzip from the web site.
Summary of Contents for 098203
