Thermo King 098203, Maintenance Manual

Page: 150 / 264

Controller Maintenance
148
2. With hand, rap the door to confirm it is
closed properly.
Flash Loading Controller Software
Controller software must be flash loaded when software has been revised. Flash load software complete
as follows:
Download the latest software file from Global Marine Solution Info Central site/Software
Update/MP4000.
The Zip file will contain the latest software and the command.ini file. Unzip them to your Desktop. The
current version when this manual was published is CM4000 3.2.0.0 w 3.2.3.0 sip Load to SD Card.zip.
SD Card Setup structure
1. Make sure the SD card is in the un-lock or writeable mode. Small tab on side slide forward is
un-locked.
2. If card is new format card so it is clean
3. Create a new directory on the SD card titled MP4000. In the MP4000 directory create two new sub
directories titled Firmware and Logs.
/ MP4000
/ Firmware
/ Logs
4. Copy the command.ini file into the /MP4000 directory of the SD card.
5. Copy the latest software file (.strip) into the \ MP4000 \ Firmware sub directory.
/ MP4000
/ command.ini 3/18/2010
/
Logs
Downloads will appear here
/ Firmware
CM4000_3.2.0.0_140822.strip
See figures 124 and 125.