![background image](http://html1.mh-extra.com/html/thermo-king/098203/098203_maintenance-manual_1104405123.webp)
Main Menu
121
Changing the AFAM+ Settings Using ‘OPTISET’
1. Press the
M
ENU
F4
key to enter the main menu. Press the
F2
or
F3
key to scroll to
Setpoint/Control
Menu and Press
F4
to expand the menu.
2. Press the
F2
or
F3
key to scroll to
Optiset
Menu.
3. Press
F4
key. The following screen will appear:
Figure 101: Optiset Menu
4. Use
F2 / F3
keys to scroll to desired product.
5. Press and hold
F4
key to auto enter product settings.
6. Display will show selected product.
NOTE: If any of the auto product settings made by ‘Optiset’ are modified, the display will now
change from the selected product to ‘CUSTOM’. This signifies that some or all of the settings have
been changed.
Modify Optiset Product Settings
1. Press the
M
ENU
F4
key to enter the main menu. Press the
F2
or
F3
key to scroll to
Setpoint/Control
Menu and Press
F4
to expand the menu.
2. Press
F3
key and scroll to the setting to be modified. Settings that can be modified:
•
Temperature Setpoint
NOTE: Setpoint changes > 5° C (9° F) will force the CO2 setting to 1%, O2 setting to 20%, cancel
the AFAM DELAY, Optimized Mode, Humidity Control and Humidity Setpoint.
•
Evaporator Fan Speed
•
Defrost Termination Temperature
•
Humidity Control
•
Humidity Setpoint
•
AFAM DELAY
•
O2 Minimum (if applicable)
•
CO2 Maximum
NOTE: Do not modify any of the above settings without direct instructions from the shipper.
Serious cargo damage could occur.
Summary of Contents for 098203
