Teledyne CombiFlash EZ Prep, User Manual

Page: 23 / 245

Section 1 Introduction
1-15
Electrical Safety per EN 61010-1
Pollution Degree 2
Installation Category II
Maximum Altitude 2000 meters
Note 1. All specifications are subject to change.
Note 2. For columns undetected by RFID, the max pressure is limited to 50 psi.
Table 1-5 CombiFlash EZ Prep Specifications
a
Dimensions 67 cm (26.5")

43 cm (17")

43 cm (17") (H

W

D)
Weight 37.4 kg (82.5 lbs.),
43.6 kg (96.1 lbs.) with ELSD detector
Power Options Input voltage range from 100 to 240 VAC , 50/60 Hz,
300VA maximum typical.
Line cord is the disconnect device.
Line Frequency 50/60 Hz
Ambient Temperature 20 to 40 °C (maximum temperature must be at least
15 °C below the boiling point of the solvent)
Humidity (when
connected to power) 0 to 95% non-condensing
Flow Rate Range 5 to 200 mL/min
Flow Rate Accuracy ±5% (5-200 mL/min)
Pressure Limit
b
241 bar (3500 psi)
Pressure Accuracy 5% of full scale
Gradient Formation Binary gradient from solvent inlets 1-4. Solvent
selection can be automatically controlled by the
method.
Gradient Accuracy ±3% (20-200 mL/min)
Table 1-4 Combi Flash Rf+ 4x System
Specifications
1
(Continued)