Teledyne CombiFlash EZ Prep, User Manual

Page: 187 / 245

CombiFlash® Rf
+
User Manual
7-2
Note
Should your network administrator request the MAC address, a
label on the system’s back panel lists the Address. You also can
find the MAC Address on the Help>About PeakTrak window.
5. Click the OK button to save the settings.
6. Confirm that your network administrator has completed
any necessary network changes to support the system.
7. Locate the CAT5 connection cable (P/N 480-6545-01) in the
accessory package. Insert one end into the Ethernet port on
the back panel. Connect the other end of the cable to your
network access port.
You should be able to connect to the Combi Flash Rf from a PC
on the network (Section 7.1.1) and configure other network
features such as network printing (Section 7.1.2) and network
file saving (Section 7.1.3). Networks with Wi-Fi access points
may also support remote control with mobile digital devices
(Section 7.1.4).
7.1.1 Network PC Access
A successfully networked Combi Flash Rf system can be
accessed by a PC that meets the recommendations listed in
Table 7-1.
Table 7-1 Personal Computer Recommendations
a
Operating Systems: Microsoft Windows 2000, XP, Vista, or Windows 7
Hardware: The computer hardware must meet the minimum
required specifications of the selected operating
system.
Network Protocol: TCP/IP
Network Connection: IEEE 802.3 (Ethernet)
Display: 800 x 600 pixels, 256 colors, minimum
Internet Browser: Last two versions of Microsoft Internet Explorer
a. This table shows supported PC configurations. Other configurations or
AJAX-compatible browsers may be possible but are unsupported by Tele-
dyne Isco.