Teledyne CombiFlash EZ Prep, User Manual

Page: 78 / 245

Section 3 Preparation: Rf 150 Systems
3-13
3.10.1 Solvents
When you installed the system, up to two solvents were
connected to the back panel. This section of the Instrument
Configuration tab allows you to name these solvents. To do so:
Note
The system is shipped with common solvent names already
loaded. If your solvent names are listed in the solvent drop-down
list boxes on the main window, skip these steps.
1. Click the “Add Solvent” button.
2. Enter the solvent name and click the OK button.
3. Repeat steps 1 and 2 for both solvents.
3.10.2 General Settings
Combi Flash Rf Name (optional) – Use this option to name
your system. The name will appear in operational displays
and run summaries. This feature is useful when your
laboratory has more than one Combi
Flash Rf system.
Time Zone – Select your time zone from the drop-down list
box.
3.10.3 Set Date/Time
Click this button to open a window from which you can set the
system date and time.
To prevent unauthorized time changes, this feature is
password protected. The system is shipped with the password
set to
combiflash . Use the Tools>Set Password menu
command to change this password for greater security.
3.10.4 Vapor Limit (Optional)
The system has internal vapor The sensor detects vapors
present in the immediate atmosphere. When the limit is
exceeded, the Combi
Flash Rf will shut down to avoid a
hazardous condition.
Teledyne Isco recommends using the default setting of 25.
This value represents an organic vapor level slightly above the
ambient vapor level of a well-ventilated laboratory.
A setting below 25 could cause random alarms without
significant vapors present. If PeakTrak displays a Vapor Limit