Teledyne CombiFlash EZ Prep, User Manual

Page: 17 / 245

Section 1 Introduction
1-9
1.4 Specifications
Table 1-1 Combi Flash Rf 150 and Rf
+
System
Specifications
1
Rf 150 Systems
(Without Inject Valve)
Rf
+
Systems
(With Inject Valve)
Overall Dimensions
(H

W

D)
61 x 36 x 43 cm (24 x 14.1 x 17")
Weight 22.3 kg (49.2 lbs) 24.5 kg (54 lbs)
Power Options
Input voltage range from 100 to 240 VAC, 50/60 Hz,
2.0 Amps maximum.
Line cord is the disconnect device.
Line Frequency 50/60 Hz
Ambient Temperature 20 to 40 °C (maximum temperature must be at least
15 °C below the boiling point of the solvent)
Humidity (when
connected to power) 95% relative humidity maximum at 20 to 40 °C
Flow Rate Range 10 to 100 mL/min 1 to 200 mL/min
Flow Rate Accuracy
(tested with water at
138 kPa or 20 psi) ±10% ±5% (5-200 mL/min)
Pressure Limit
2
1,034 kPa (150 psi) Up to 1379 kPa (200 psi)
(column dependent)
Pressure Accuracy 10% of full scale 5% of full scale
Gradient Formation Binary gradient from 1
and 2 solvent inlets.
Optional manual valves
to select from 1, 2, and 3,
4 inlets. Binary gradient from 1, 2,
and 3, 4 solvent inlets.
Solvent selection can be
automatically controlled
by the method.
Gradient Accuracy: ±2% of full scale, typical;
±5% maximum ±1% of full scale
Peak Detection Modes Slope or threshold
Flow Cell Pathlength 0.1 mm, ±25%